Dental High Speed Low Speed Handpiece Kit 2,4holes/ Diamond Burs Medium FG Grit

Dental High Speed Low Speed Handpiece Kit 2,4holes/ Diamond Burs Medium FG Grit

by Comments Off
Dental High Speed Low Speed Handpiece Kit 2,4holes/ Diamond Burs Medium FG Grit
Dental High Speed Low Speed Handpiece Kit 2,4holes/ Diamond Burs Medium FG Grit
Dental High Speed Low Speed Handpiece Kit 2,4holes/ Diamond Burs Medium FG Grit
Dental High Speed Low Speed Handpiece Kit 2,4holes/ Diamond Burs Medium FG Grit
Dental High Speed Low Speed Handpiece Kit 2,4holes/ Diamond Burs Medium FG Grit
Dental High Speed Low Speed Handpiece Kit 2,4holes/ Diamond Burs Medium FG Grit
Dental High Speed Low Speed Handpiece Kit 2,4holes/ Diamond Burs Medium FG Grit
Dental High Speed Low Speed Handpiece Kit 2,4holes/ Diamond Burs Medium FG Grit

Dental High Speed Low Speed Handpiece Kit 2,4holes/ Diamond Burs Medium FG Grit
High speed handpiece Features. High speed handpiece. 2-Hole /4- Hole standard push button handpiece. Single-way water spray. It has unique appearance design and fluent outline. Smooth as silk, it has excellent texture. With people-friendly design, easy for operation. With best quality cartridge, easier for cleaning. With high-speed turbine rotation, it has better performances. Chucking power of chucking needle is 20N-45N. It is noise-free and stable. Applicable Bur: 1.6mm and should be conformed to ISO standard. Idling speed of handpiece should be no less than 370,000 rotations under working air pressure of 25- 30 pressure atmosphere. Special for operations such as clamping high-speed dentistry machine needle to drill and grind teeth in department of stomatology, it is more professional. It is only for people who have dentistry medical qualification. Standard Push button type, high speed handpiece, Single-way water spray. 180250 KPa (1.82.5 kgf/cm2). 370,000-420,000 rpm. 1.59mm? 1.6mm×21mm23mm (diameter×length). Low speed kits Features. Precise technology, Steady, no vibration while revolving, offering a steady operation. Suitable for any E-type handpiece accords with ISO standard. 135°C Autoclavable, suitable for both steam and chemical autoclave. Low Speed 22,000-27,000 rpm. The shank of the instrument mounted therein is 2.35 mm. Fastening of the instruments with a turning latch. For any lab or E-type motors. Working pressure: 0.3MPa. 0.25MPa (Measure meter is installed at the end of air motor to measure the air pressure). Air consumption: about 56L/min. Ratio: 1:1. Max speed of contra angle: 25000rpm/min. Supply air pressure: 245-392KPa (2.5-4kgf/CM2). 1:1 Direct Drive. 2 hole /4 hole. Max speed 20,000 min-1. High speed handpiece push button 4 holes : 2 each. E-type air motor 4-Holes: 1 each. Straight nose cone: 1 each. Contra Angle handpiece: 1 each. Water spray nozzle: 1 each. Oil spray nozzle: 1 each. CAP Spanner: 1 each. BR-31 BR-41 BR-45 BR-46 TR-12 TR-13 TR-14 TR-15 TR-19 TR-13C. TR-13F TR-62C SF-41 FO-11 FO-25 FO-32 FO-30F TC-11 TF-11 TF-13C. TF/Taper Flat End TR /Taper Round End. TC/ Taper Conical End FO/Flame Ogival End. SF /Straight Flat End BR/ball Round. 20boxes: 100pcs dental diamond burs. Diamond Bur is whole combination for sale, Customer could not choose model.
Dental High Speed Low Speed Handpiece Kit 2,4holes/ Diamond Burs Medium FG Grit
5/100/1000 Dental Diamond Burs Drill Medium FG1.6MM Fit High Speed Handpiece A1

5/100/1000 Dental Diamond Burs Drill Medium FG1.6MM Fit High Speed Handpiece A1

by Comments Off
5/100/1000 Dental Diamond Burs Drill Medium FG1.6MM Fit High Speed Handpiece A1

5/100/1000 Dental Diamond Burs Drill Medium FG1.6MM Fit High Speed Handpiece A1
TF means Taper Flat End TR means Taper Round End. TC means Taper Conical End FO means Flame Ogival End. SF means Straight Flat End SO means straight Ogival End. EX means SPecial shape BR means ball Round. BC means Ball collar Type DI means Double Inverted Cone. SI means Single inverted Cone WR means wheel Round Edge CR means inlay preparation CD means Childern’s dentistry. S means short shank SS means super short shank. For dental use only. Inserthion should be the full length. Before use, run the instruments to make sure there is no descentering. If the instruments become bent, be sure to remove them from any further use. Please always use spray. A plentiful water supply is necessary to maintain long-lived performance and also to prevent loading and pulpitis. Handle with care not to put excessive load. Pressure should be 20p-50p for all instruments with diameter up to 023. M of each instrument, see chart above, to avoid a possibility of being injured due to breakage. Avoid levering, tilting, twisting and jamming motion. Do not work with a pulling motion. Wear a safety glasses and/or facemask to protect from being injured. Practicable for using auto-clave. Do not use high pressure steam sterilizer which heats more than 200 degree drying process. After using, follow appropriate treatment as the medical waste. The sale of this item may be subject to regulation by the U. Food and Drug Administration and state and local regulatory agencies. IMPORTANT INFORMATION ON OUR POLICY AND FEEDBACK. Feedback if you are satisfied with our items. We try to be fair and accurate with all of our product listings and descriptions. If there is a problem, we can work together to resolve it. We strive to always be extremely fair and always try to work with reasonable customers. We will always make every attempt possible to resolve issues if we made a mistake. Please do not assume a mistake is intentional. Let us know if our service could be better! Tracking info of your parcel is available. The following form is for your reference. Please repack the item carefully. FDA for Curing Light? 510(K) Number: K192233. Regulation Number: 21 CFR 872.6070. 510(K) Number: K181691. Regulation Number: 872.4200. Classification Product Code: EFB. Subsequent Product Code: EGS. 510(K) Number: K163414. Regulation Number: 872.4850. FDA for Curing Light. This item is in the category “Business, Office & Industrial\Healthcare, Lab & Dental\Handpieces & Instruments\Dental Handpieces”. The seller is “dental-usa” and is located in this country: CN. This item can be shipped worldwide.
  • types: BR-30
  • qty: 1000 pcs / 200 box
  • FDA 510（k）number: K181691
  • 510(K) Number For Scaler: K163414
  • Custom Bundle: No
  • Subsequent Product Code for dental handpiece: EGS
  • Modified Item: No
  • Intended Use/Discipline: Dental Laboratory, Dentistry
  • Brand: Unbranded
  • 510(K) Number For Dental Handpiece: K181691
  • Classification Product Code for dental handpiece: EFB
  • Unit Type: 100g
  • 510(K) Number For Curing Light: K192233
  • Regulation Number for dental handpiece: 872.4200
  • Country/Region of Manufacture: China

5/100/1000 Dental Diamond Burs Drill Medium FG1.6MM Fit High Speed Handpiece A1