0.5A Input Voltage: 110-220V/50-60Hz Speed: 0-35000rpm/min Gross Weight: 2kg/ 4.4lbs Fit Bur Size: 2.35mm/0.09in Pedal Line Length: 1.6m/5.25ft Power Cord Length: 1.55m/5.09ft. Package Size: 252210cm/9.848.663.94in Package Included 1 Marathon Control Box 1 Foot Pedal 1 Handpiece Base 1 Handpiece All Accessories for Installation. Marathon Dental Lab Micromotor Drill Polisher Machine N3 + 35K RPM Handpiece NEW. The body of this product is small and light, and its handle can be used at will like a pencil. And its maximum rotation force can reach 35000rpm, which is suitable for cutting, grinding, polishing, and other work. You can replace various burrs at will according to the material and working method. The instrument can be connected to the power pedal, and you can easily control the switch with your feet. It allows you to free your hands and focus more on the work at hand. Through the use of a. Speed regulation switch, the instrument can output from zero to 35000rpm. It is very convenient to adjust the speed. You just need to rotate the switch according to your needs. The instrument has two control modes: positive and negative switch and pedal. It alllows you to change the bur and it can be easily restored back to the original position. You can choose the control system you like at will. The instrument is very compact, and the handle can be used like a pencil. It can be easily operated at any angle. The production body adopts an integrated design, so you don’t need to assemble it separately. You only need to connect the handle and foot pedal with the body to start using it. The body adopts a compact control box, which is small and light, and the product weight is only 4.4 pounds. It is very convenient for both indoor use and outdoor use. It uses a high-power motor with an output power of up to 65W and a max rotating speed of 35000rpm, which can help you quickly finish polishing, cutting, milling, finishing, grinding, casting mold or materials, and other surface finishing work. The instrument is a regular isosceles trapezoid and its surface is smooth, so it is very easy to clean. You only need to wet the cotton cloth with water and gently wipe it. Spring wire is used as the connecting wire between the handle and the body. It allows the handle to be stretched and rotated freely to the maximum extent while being fully powered, effectively reducing the impact of the distance between the body and the handle on you. The handle is carved with. Patterns, which can effectively prevent the handle from slipping and ensure your safety during use. The handle can be disassembled and replaced. In addition, the package also contains tools to replace the handle, making it more convenient for you to replace the handle. The package contains a square base groove for placing the handle, which can make the placement of the handle more stable. It uses 5.25ft pedal line and 5.09ft power cord, allowing you to have enough disposable length. Therefore, the limitation of use is reduced. This product is suitable for cutting, grinding, and polishing. You can use various burrs according to the material and working method. The products are mainly used in dental laboratories and clinics, jewelry, nails, sculpture, orthopedics, and other purposes. Material: Plastic, Stainless Iron, Copper. Gross Weight: 2kg/ 4.4lbs. Fit Bur Size: 2.35mm/0.09in. Pedal Line Length: 1.6m/5.25ft. Power Cord Length: 1.55m/5.09ft. Package Size: 252210cm/9.848.663.94in. All Accessories for Installation. When turning the machine on or off and do reversible switching, please remember to set the speed control to zero. To avoid the problem of lax speed control and extend the service life of the machine, please adjust the speed of the speed controller to “minimum” before starting the following operations: press the “on” or “off” button to switch the speed between clockwise and counterclockwise directions, or switch the control between manual and foot pedal. Please allow the slight color difference caused by the shooting light and the 1-3 cm error due to manual measurement, and make sure you do not mind before ordering. France, Germany, spain, Italy. Feedback is very important to us. It is impossible to address issues if we do not know about them! Please keep the original box or packaging within 15days since item received. Your satisfaction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday.
